+47 70 07 60 80  


Shipadmin Electronic Muster Reader

Shipadmin deliver various solutions for electronic registration of crew/personnel on muster station. All four options is based on RFID technology and option 2, 3 and 4 can be combined with manual registration locally on muster station (In case personnel show up without card). Option 1 require manual input directly from software i.e. at bridge computer.

Electronic Muster Reader used in combination with Electronic Gangway Reader give the option to see who is not currently on-board and may not be present during mustering.

All online solution makes it possible for the officers to monitor in real time when crew/personnel is present at muster station.







Option 1 -Fixed Muster Station

RFID reader installed permanently in vicinity of vessel muster station(s), require cat. 6 or 7 cable from server room to desired location. (Not included)

When personnel ID card is swiped, an integrated green light and buzzer will confirm registration and person will be shown as present on muster station in Vessel Manager Software.

Unit can only take input electronically from RFID card. If manual input/override is required, this can only be done in software and on a computer connected to the network.




Features
• RFid handsfree, card reader for
• TCP/ip Interface
• Online reader
• Powered by PoE
• Available on EX-version
• Wall mount
• Low power consumption
• Windowes 7Pro, 2000 Server, 2008 Server Supported
• Integrated Vessel Manager software


Electrical
• Tcp/ip Interface
• Power, PoE or 12vDC, on Battery Backup solution
• Cable, cat.6 or cat.7

Dimention
• Width:145mm
• Depth:95mm
• Height:230mm






Option 2 -Portable tablet – offline.

Fully rugged tablet with integrated RFID reader, used for crew/personnel registration at muster station.

When not in use the unit will be stored in docking station normally situated in the bridge. When unit is docked, it synchronizes with Vessel Manager Software. When the alarm sets off, the unit will be collected from docking station containing most recent muster list and brought to actual muster station. At muster station, personnel swipe their card on the backside of the unit for electronic registration. If a person has left his/her card behind, manual registration can be done by a tap on actual name. (Touch screen)

For reporting back to Vessel Manager Software the unit has to be docked again





Tablet Technical Description

Strong Sunlight Viewable Display
To increase the screen durability and provide greater sunlight readability, the Z710 features Lumibond and optical bonding and also uses special damage resistant Gorilla Glass. Making the Z710 both tough and scratch resistant to withstand the abuses of working in extreme conditions.

Ruggedness
• MIL-STD-810g and IP65 certified
• Vibration Resistant
• Drop Resistant(26 drops from 1.82m/6ft)
• Optional ANSI/ISA 12.12.01

Microprocessor
OMAP 4430 Dual Core 1 GHz

Memory
1GB MDDR

Storage
16gb iNAND

Display
7.0" TFT LCD WSVGA (1024 x 600);
LumiBond® display with Getac sunlight readable technology
Capacitive touchscreen with glove on





Option 3 -Portable tablet – online.

Same tablet as in option two, additional outdoor WiFi antenna is required within the vicinity of muster station(s).

Online solution is more flexible as it can report to Vessel Manager Software in real-time. See system description below with use of multiple readers.

WI-FI antenna delivered by Shipadmin requires cat. 6 or 7 cable from server room to desired location. (Not included)




Option 4 -Fixed Muster Screen – online.

Touch screen with integrated RFID reader installed permanently in vicinity of vessel muster station(s), require cat. 6 or 7 cable from server room to desired location. (Not included)

When personal ID card is swiped, registration will be confirmed by actual name being highlighted and person will be shown as present on muster station in Vessel Manager Software on any computer connected to network.




Features
• RFid handsfree, cardreader for EM4102 or Mifare
• TCP/ip Interface
• Powered with 230v or 12vDC
• Available in idoor and outdoor version
• Wall Mount
• Fanless CPU
• Windows7Pro Supported
• Touch screen
• Integrated in Vessel Manager
• LCD size 12.1"
• Brightness 500cd/m2


Electrical
• Tcp/ip Interface"
• Connects to Power, 230v or 12vDC, on Battery Backup


Dimention
• Width:300mm
• Depth:50mm
• Height:250mm
Environmental
• Operating temparature: -20C to 60C
• Humidity: 0%-80% RH (non-condensing)



POB Solutions

Our Personnel-on-Board (POB) solutions are based on zone control using RFID technology.


Back

  • Shipadmin Gangway SecurityOpen or Close

    Shipadmin deliver various solutions for electronic registration/access at vessel gangway and/or into accommodation.

    All online solution makes it possible for the officers to monitor in real time when crew/personnel embark or disembark at the gangway or any other locations covered by RFID readers.


    Learn More
  • Shipadmin Muster ReadersOpen or Close

    Shipadmin deliver various solutions for electronic registration of crew/personnel on muster station. All four options is based on RFID technology and option 2, 3 and 4 can be combined with manual registration locally on muster station (In case personnel show up without card). Option 1 require manual input directly from software i.e. at bridge computer.


    Learn More
  • Electronic Cabin LocksOpen or Close

    The Electronic Cabin Lock is integrated with the Shipadmin software


    Learn More
  • ID-Card Production KitOpen or Close

    The system also contains equipment and software-module to create ID-Cards. You take a photo and create the card in one easy operation. You can create ID-Card for the crew with name and personal information. You can also make standard "Visitor" ID-cards. In the system, you can easily de-activate cards if needed.


    Learn More
  • AccessoriesOpen or Close

    We deliver all you need of accessories needed for producing and use ID cards and wristbands.


    Learn More