+47 70 07 60 80  


Shipadmin Gangway Security

Shipadmin gangway reader comes with two x RFID readers. This solution is based on “voluntary” registration, as there is no physical barrier. Personnel equipped with RFID card swipe their card when passing reader, either in or out. All registrations is available in Shipadmin Vessel Manager Software.

Shipadmin Gangway Reader has been installed in heli-reception on some vessels to register who is leaving/arriving by helicopter.






Option 1 -Turnstile

Shipadmin turnstile comes with in-built camera, telephone and two x RFID readers. If turnstile and remote monitoring being described method for access-control in vessel ISPS manual at level 1, manned gangway may not be required.

Built in telephone will be connected to ships PABX and call from gangway will be routed to required internal telephone i.e. bridge or watch phone.

Gangway camera will be connected to vessel video matrix and gives the option to monitor gangway from any network station having access to video matrix.

In Shipadmin Vessel Manager Software you can keep track of all entries and exits and at all-time know who is on-board or ashore.




Key Figures:
• RFid handsfree, card readers
• TCP/ip Interface
• Online reader
• Electromechanical lock on turnstile
• Failsafe, open when powerless
• Powered with PoE or 12/24 vDC
• Low power
• Integrated in Vessel Manager software
• Tcp/ip Interface
• Power, PoE or 12/24vDC
• Cable, cat.6 or cat.7
• Operating temperature: -10oC to 50oC
• Storage temperature: -20oC to +60oC
• Humidity: 0% - 85% RH (non-condensing)




Option 2 - Gangway Reader

Shipadmin gangway reader comes with two x RFID readers. This solution is based on “voluntary” registration, as there is no physical barrier. Personnel equipped with RFID card swipe their card when passing reader, either in or out. All registrations is available in Shipadmin Vessel Manager Software.

Shipadmin Gangway Reader has been installed in heli-reception on some vessels to register who is leaving/arriving by helicopter.




Key Figures:
• RFid handsfree, card readers
• TCP/ip Interface
• Online reader
• Electromechanical lock on turnstile
• Failsafe, open when powerless
• Powered with PoE or 12/24 vDC
• Low power
• Integrated in Vessel Manager software
• Tcp/ip Interface
• Power, PoE or 12/24vDC
• Cable, cat.6 or cat.7
• Operating temperature: -10oC to 50oC
• Storage temperature: -20oC to +60oC
• Humidity: 0% - 85% RH (non-condensing)




Option 3 - Magnetic Door Lock

Magnetic door lock is often used for access control on vessels designed with an enclosed entry hall, i.e. when coming up the gangway, you will first enter an enclosed space. For further entry into vessel you have to swipe your RFID card to open the door. This solution can be combined with same integration as on turnstile (Telephone, camera and RFID readers) Magnetic lock can be used on various types of doors. Will be fitted with overriding exit button, emergency exit (brake glass type) and opening relay connected to vessel alarm system. System may replace watchman at gangway / entrance.




Key Figures:
• RFid handsfree, card readers
• TCP/ip Interface
• Online reader
• Electromechanical lock on turnstile
• Failsafe, open when powerless
• Powered with PoE or 12/24 vDC
• Low power
• Integrated in Vessel Manager software
• Tcp/ip Interface
• Power, PoE or 12/24vDC
• Cable, cat.6 or cat.7
• Operating temperature: -10oC to 50oC
• Storage temperature: -20oC to +60oC
• Humidity: 0% - 85% RH (non-condensing)




Option 4 - Combination or Custom

Shipadmin also delivers tailor made solution on request or combinations of any standard products listed.




RFID Reader in Ex housing


Turnstile mounted in reception.


Gangway reader mounted in Heli-reception


Reader at lifeboat entrance.


POB Solutions

Our Personnel-on-Board (POB) solutions are based on zone control using RFID technology.


Back

  • Shipadmin Gangway SecurityOpen or Close

    Shipadmin deliver various solutions for electronic registration/access at vessel gangway and/or into accommodation.

    All online solution makes it possible for the officers to monitor in real time when crew/personnel embark or disembark at the gangway or any other locations covered by RFID readers.


    Learn More
  • Shipadmin Muster ReadersOpen or Close

    Shipadmin deliver various solutions for electronic registration of crew/personnel on muster station. All four options is based on RFID technology and option 2, 3 and 4 can be combined with manual registration locally on muster station (In case personnel show up without card). Option 1 require manual input directly from software i.e. at bridge computer.


    Learn More
  • Electronic Cabin LocksOpen or Close

    The Electronic Cabin Lock is integrated with the Shipadmin software


    Learn More
  • ID-Card Production KitOpen or Close

    The system also contains equipment and software-module to create ID-Cards. You take a photo and create the card in one easy operation. You can create ID-Card for the crew with name and personal information. You can also make standard "Visitor" ID-cards. In the system, you can easily de-activate cards if needed.


    Learn More
  • AccessoriesOpen or Close

    We deliver all you need of accessories needed for producing and use ID cards and wristbands.


    Learn More